discover

Big-bag discharge devices: Empty big bags with low dust and completely

Big-Bag Entleerstation

RATEC big-bag discharge devices combine a frame, big-bag support and docking device in a compact unit and ensure near dust-free emptying of powders and granulates. During emptying, the big bag rests securely on the support, and, if required, pneumatic pistons or vibration motors help to ensure it is completely emptied. The devices are available in ATEX- and FDA-compliant versions, making them suitable for sensitive and potentially explosive areas as well. RATEC develops and manufactures each discharge device in-house in St. Veit an der Glan.

How big-bag discharge devices work

  1. Set down: The full big bag is placed onto the device support using your existing lifting equipment, such as a crane or a forklift with a spreader beam.
  2. Dock: The discharge spout is clamped tightly into the integrated docking device.
  3. Empty: The bulk material flows into your process; the dust remains in the system.
  4. Empty residues: Pneumatic pistons or vibration motors loosen the product in the big bag until it is completely empty.

After that, the spout is released and the empty big bag is removed.

Who discharge devices are suitable for

Discharge devices are the device only, without their own lifting equipment and without a spreader beam. This makes them the right choice if you already move your big bags with an overhead crane, a chain hoist or a forklift. You only invest in what you still need: a stable frame, a secure support and a sealed connection to the process.

If, on the other hand, you need a solution that also lifts big bags, our big-bag discharge stations with electric chain hoist and spreader beam are the right complete system.

Big-bag discharge device, low

Complete emptying with pistons or vibration

Many bulk materials do not flow completely out of the big bag on their own. Moist, fine or adhesion-prone products tend to remain in the corners and on the fabric or form bridges above the outlet. What remains in the big bag is lost product, and additional dust is generated when removing the big bag.

RATEC discharge devices can therefore be equipped with discharge aids. Pneumatic pistons press against the big bag from the outside and loosen stuck material. Vibration motors set the support into vibration and keep the product moving. We select the right discharge aid based on your product and your big bags.

Equipment and features

  • Frame with big-bag support: stable; the big bag rests securely during emptying.
  • Integrated docking device: clamps the discharge spout tightly for near dust-free emptying.
  • Discharge aids: optional pneumatic pistons or vibration motors.
  • ATEX and FDA: versions for potentially explosive areas and with FDA-compliant, product-contact materials.
  • Ergonomic and robust: high-quality materials, ergonomic operation, emergency stop and stable fastening.

We configure the frame, support and discharge aids to suit your product, your big bags and your space conditions. We manufacture other sizes and versions to your specifications.

Use in sensitive and potentially explosive areas

Thanks to the ATEX- and FDA-compliant design, RATEC discharge devices are suitable for the food and pharmaceutical industries as well as for potentially explosive areas in the chemical industry. The docking device is continuously grounded. In Ex areas, the big bag is also important: conductive Type C big bags that must be grounded, or antistatic Type D big bags, are common. The classification is described in the IEC 61340-4-4 standard.

Discharge device, discharge station or docking device?

RATEC offers low-dust discharging in three configuration levels:

  • Docking devices: only the sealed connection between big bag and process, for installation in your existing system.
  • Discharge devices: frame, big-bag support and docking device in one, without lifting equipment and spreader beam.
  • Discharge stations: complete systems with electric chain hoist, spreader beam and docking device for lifting and emptying.

What Matters for Design

  • Bulk material: flow behavior, tendency to adhere and to form bridges.
  • Big bags: dimensions, weight and design of the discharge spout.
  • Handling: which lifting equipment is used to place the big bags onto the device.
  • Space conditions: installation space, height and connection to your process.
  • Special requirements: ATEX, FDA, discharge aids or special versions.

Where big-bag discharge devices are used

RATEC big-bag handling systems are used in the pharmaceutical industry, the food industry, fine and bulk chemicals, the building materials industry and the plastics industry. Discharge devices are typically positioned above mixers, containers, dosing systems or conveying lines to which the bulk material is transferred directly.

Big-bag discharge device, high

Custom-made by RATEC

RATEC is at home in the bulk materials sector and manufactures components for bulk material systems in its own plant in Carinthia, certified to ISO 9001, EN 1090-1 and ISO 3834-2. From a single discharge device to a complete system for filling, emptying, lifting and closing technology, you get everything from a single source. You can find an overview of all products under Big-Bag Handling.

Do you want to empty big bags completely and with low dust?

Briefly describe your bulk material, your big bags and your existing lifting equipment. We will get back to you with a concrete solution proposal.

Frequently asked questions

Key factors include bulk material, big bag dimensions and weight, existing lifting technology, process integration, space requirements, and ATEX or FDA compliance. RATEC engineers every solution to customer specifications; therefore, no flat-rate pricing is available. You will receive a customized quote.

Send inquiry now

Yes, discharge devices can be built ATEX-compliant and with FDA-compliant, product-contact materials. In Ex zones, a suitable, dissipative big bag is also essential. RATEC’s docking system is fully grounded throughout; both versions are available on request.

Residual material tends to remain in the corners of the big bag, especially with poor-flowing products. Pneumatic rams or vibration motors move the bag so even the last material can discharge. RATEC can optionally tailor these discharge aids to your bulk material, especially for products prone to bridging.

A discharge device is a good fit when a forklift or crane is already available and a simple, compact solution is needed. A discharge station pays off when the big bag needs to be lifted directly at the station or is emptied frequently. RATEC advises you on the right design based on your process.

The big bag is placed onto the frame using a forklift or lifting beam and lowered onto the docking station, where the outlet spout is clamped dust-tight. An integrated hoist is not required. RATEC discharge devices combine the frame, big bag support, and docking station into a single unit.