discover

Big-Bag Inlet Closure

Big-Bag Einlaufverschluss

The RATEC Big-Bag inlet closure automatically opens and closes the filling opening of a production container so that only the correct product from a Big-Bag enters the container. A pneumatic rotary actuator moves a cover skirt; it only opens after enable by your control system, for example via a barcode on the Big-Bag. Two-hand control and a safety edge on the cover skirt protect your personnel during opening and closing. RATEC develops and manufactures each inlet closure in-house in St. Veit an der Glan.

What do you need a Big-Bag inlet closure for?

Where Big-Bags are emptied into containers by hand, the open filling opening is a weak point. If the wrong Big-Bag is filled, in the worst case an entire batch is lost, and depending on the product there is a risk of downtime, cleaning and complaints. In addition: an opening that is permanently open lets dust escape and foreign objects in.

The inlet closure solves both. The opening remains closed until the control system enables it. If the product does not match the container, the closure stays shut. This turns a simple cover into mix-up protection directly at the container.

How the Big-Bag inlet closure works

  1. Closed: In the idle state, the cover skirt covers the inlet spigot; a proximity switch reports “closed” to the control system.
  2. Scan: The barcode on the Big-Bag is checked. Only if the product matches the container does the control system enable opening.
  3. Open: Using two-hand control, the cover skirt rolls away; a second proximity switch reports “open”.
  4. Fill: The Big-Bag is emptied into the container.
  5. Close: Again using two-hand control, the cover skirt closes.
  6. Safeguard: If there is an obstacle in the way during closing, e.g. Big-Bag fabric, the safety edge stops the closing process immediately.

Safety for personnel and product

The inlet closure is designed for a safe process in everyday operation:

  • Two-hand control: To open and close, the operator needs both hands on the controls. This prevents anyone from getting a hand into the area of the moving skirt. Two-hand controls are a proven protection principle in machine safety; the principles are described, for example, in ISO 13851.
  • Safety edge: It is mounted on the cover skirt and interrupts the closing process as soon as it encounters an obstacle.
  • Position feedback: Two proximity switches report “closed” and “open” to the on-site control system. This means your control system always knows the container status.
  • Product enable: Barcode checking allows opening to be linked to the correct product.

Technical specifications

FeatureRATEC Big-Bag inlet closure
Installation locationInlet spigot
Drivepneumatic rotary actuator
Closurecover skirt that moves over the inlet spigot
Product enablevia the control system, e.g. via barcode on the Big-Bag
Operationtwo-hand control for opening and closing
Safeguardingsafety edge on the cover skirt
Position indicationtwo proximity switches (“closed”, “open”)
VersionsATEX- and FDA-compliant materials on request

We adapt spigot size, control connection and operating concept to your container. We manufacture other dimensions and versions to your specifications.

Connection to your control system

The inlet closure works together with your existing plant control system. The position signals from the proximity switches go to the on-site control system, and that is also where the decision is made whether a Big-Bag is enabled. We coordinate the exact product enable process during design with you and your control system integrator, for example which scanner is used and how the product data is stored.

Part of a coordinated overall system

The inlet closure is the last step in Big-Bag handling before the product enters the process. RATEC also supplies the preceding steps and coordinates everything: the Big-Bag filling station, lifting beams for safe lifting, as well as emptying stations and docking devices for dust-free emptying.

Big-Bag inlet closure open

Where Big-Bag inlet closures are used

An inlet closure is worthwhile wherever multiple products are processed in a plant and a mix-up would be costly. Typical applications are production and mixing containers in the pharmaceutical industry, the food industry, fine and bulk chemicals, the building materials industry and the plastics industry, where raw materials are added from Big-Bags.

Custom-made by RATEC

RATEC is at home in the bulk materials sector and manufactures components for bulk material plants in its own facility in Carinthia, certified to ISO 9001, EN 1090-1 and ISO 3834-2. Each inlet closure is designed for your container, your control system and your process—on request in an ATEX-compliant version for potentially explosive atmospheres and with FDA-compliant, product-contact materials. You can find an overview of all products under Big-Bag Handling.

Do you want to rule out mix-ups at the container?

Briefly tell us about your container, your products and your control system. We will get back to you with a concrete solution proposal.

Frequently asked questions

In many cases, yes, provided there is sufficient space at the inlet nozzle for the cover apron and drive. Integration into the existing control system must also be clarified. RATEC designs the cover apron, drive, and connection to match your specific container—available with ATEX compliance and FDA-compliant materials upon request.

The closure only opens once the control system has identified the correct product, for example via a barcode on the big bag. This ensures no incorrect product can enter the container. At RATEC, two proximity switches report the “open” and “closed” positions to the control system, making every filling process traceable.

An inlet closure keeps a production container’s filling opening closed and only opens it when filling is actually intended. This prevents dust, foreign objects, or the wrong product from entering the container. RATEC inlet closures open via a pneumatic rotary actuator, with a cover skirt moving over the inlet nozzle.

Opening and closing are executed via two-hand control to keep hands clear of the hazard zone. Additionally, RATEC units feature a contact strip on the cover apron that triggers an immediate stop if an obstruction is detected. This inlet closure ensures both process reliability and occupational safety.