discover

Piston sampler: targeted sampling from silo, vessel and pipeline

Kolbenprobenehmer eingefahren und ausgefahren

The RATEC piston sampler takes targeted samples from silos, vessels, chutes, downpipes and conveying lines, as a single sample or in continuous operation. A piston moves into the product, takes the sample and discharges it directly into the sample container, in size DN 50 and with manual, electric or pneumatic drive. Options such as a weld-on end and position feedback simplify installation and automation; on request, we supply the piston sampler pre-installed in a downpipe. RATEC develops and manufactures each unit in-house in St. Veit an der Glan.

How the piston sampler works

  1. Insert: The piston moves through the wall of the silo or line into the bulk material.
  2. Collect: It takes a sample from the product.
  3. Discharge: On the return stroke, it discharges the sample into the connected sample container, for example a laboratory bottle.

For a single sample, the piston moves in and out once. In continuous operation, it produces a steady product flow into the sample container.

Technical specifications

FeatureRATEC piston sampler
SizeDN 50
Installation locationsSilo, vessel, chute, downpipe, conveying line
Drivemanual (hand lever), electric or pneumatic
Operating modeSingle sample or continuous
OptionsWeld-on end, position feedback, sample container, installation in the downpipe
VersionsATEX- and FDA-compliant materials on request

Versions

  • Manual operation: with hand lever, ideal for selective sampling without a power supply
  • With sample container: The sample drops directly into the connected laboratory bottle, clean and low-dust.
  • Installed in the downpipe: as a complete assembly including control system and sensors, ready to install in your plant
  • Automated: electric or pneumatic, with position feedback for connection to your control system

Custom-made by RATEC

RATEC is at home in the bulk materials sector and manufactures components for bulk material plants in its own facility in Carinthia, certified to ISO 9001, EN 1090-1 and ISO 3834-2. Each piston sampler is designed for your bulk material and your installation situation, on request with a sample collector for up to 48 sample containers and sample transport to the laboratory. If a sampling standard such as ISO 11648-2 or an internal test specification applies to your product, we take it into account in the design.

RATEC samplers are used, among other areas, in the chemical industry, the minerals industry, the food and pharmaceutical industry, petrochemicals, the rubber and carbon black industry, animal feed and seed, the wood and paper industry, and recycling. You can find an overview of all designs under Samplers.

piston sampler

Are you planning sampling from a silo or line?

Briefly describe your bulk material and your installation situation. We will get back to you with a specific solution proposal.

Frequently asked questions

Key factors include bulk material data such as grain size, flowability, moisture, temperature, and tendency to stick, as well as installation conditions, sample quantity and frequency, drive type, and ATEX, FDA, or sampling standard requirements. RATEC provides a questionnaire for sampling systems for your inquiry. There is no flat-rate price, as each unit is engineered to the bulk material and installation situation — you will receive an individual quote.

Send your inquiry now

A sample is representative when it is taken from the moving product stream, at regular intervals and always in the same way, and when the sample quantity matches the particle size. Samples taken from the edge of a stationary silo often give a distorted picture because bulk material segregates. RATEC therefore recommends installation points in drop or conveying lines and considers standards such as ISO 11648-2 or your internal test specification in the design.

In most cases, yes — the sampler is mounted onto the existing wall of a silo, container, or pipe via a welding stub or flange. If on-site conversion is complex, RATEC supplies the piston sampler pre-installed in a drop pipe, including controls and sensors. Only a section of piping then needs to be swapped out, keeping your system’s downtime to a minimum.

Yes, piston samplers can be integrated into pneumatic conveying lines if seals and piston guides are designed for the line pressure. It is critical that no conveying air escapes and no product leaks during retraction. RATEC accounts for overpressure or vacuum during the engineering phase; please specify the conveying method and operating pressure for your custom quote.

The difference lies in the sampling principle and sample quantity. Piston samplers move a piston linearly into the product. Rotary piston samplers use a rotating piston to open a larger aperture. Screw samplers actively convey the product into the vessel via a screw. For standard sample volumes, RATEC provides compact DN 50 piston samplers; for larger quantities, DN 100 rotary piston samplers are available.

A piston sampler is used for bulk materials (powders, granulates, dusts, grains). A piston extends through a silo or pipe wall, collects a sample, and retracts to deposit it into a sample container. RATEC piston samplers are standard DN 50 size, installed in silos, containers, chutes, downpipes, and conveyor lines. Other sizes available upon request.