discover

Rotary Piston Sampler: Sampling from silos, containers, and pipelines

Drehkolbenprobenehmer

A rotary piston sampler takes samples from bulk material directly where it is stored or flows: in silos, containers, chutes, downpipes, and conveying lines. A piston with a rotary drive opens the sampling aperture, and the sample reaches the sample container without any detour. With the DN 100 size, the rotary piston sampler is also suitable for larger sample quantities. RATEC GmbH from St. Veit an der Glan develops and manufactures it in-house and designs each device for your specific bulk material and installation situation.

What is a rotary piston sampler?

A rotary piston sampler is a sampler for powders, granules, dusts, and grains, in which a rotatably mounted piston controls the extraction. It is mounted on the wall of a silo, container, or pipeline and takes the sample directly from the product.

The difference compared to the piston sampler lies in the movement: there, the piston moves linearly into the product and back out again. In the rotary piston sampler, the piston rotates, thereby clearing the sampling aperture. Together with the larger nominal diameter, it is the first choice if you need more sample material than a DN 50 device provides.

How the RATEC rotary piston sampler works

The sampling process in three steps:

  1. Opening: The rotary drive turns the piston into the extraction position. The sampling aperture is clear, and bulk material flows in.
  2. Discharging the sample: The material passes through the outlet directly into the connected sample container, such as a bottle, a bag, or a bin.
  3. Closing: The piston rotates back and closes the aperture. The silo or line remains sealed, and the process continues.

The rotary piston sampler operates in two modes. Discontinuous opens only briefly and provides a specific individual sample. Continuous keeps the aperture open over a defined period, and a partial stream is continuously extracted.

Choose the drive that fits your process:

  • Manual: for spot sampling and smaller quantities, completely without a power supply.
  • Electric: for automated processes, easily integrated into existing production lines.
  • Pneumatic: for automated processes, with position feedback to the control system.

For installation in containers, the KXP-15 type with a pneumatic rotary drive is available.

Technical specifications

FeatureRATEC Rotary Piston Sampler
TypesKXP, KDP (e.g., KXP-15 for container installation)
SizeDN 100
Installation locationsSilo, container, chute, downpipe, conveying line
Drivemanual, electric, or pneumatic
Operating modeIndividual sample (discontinuous) or continuous
Bulk materialsPowders, granules, dusts, grains
OptionsATEX version, FDA-compliant product-contact materials, sample collectors, sample transport
Rotary piston sampler set up

Advantages of the rotary piston sampler

  • Also for larger sample quantities: The DN 100 size provides sufficient material, for example, for multiple analyses or retention samples.
  • Individual sample or continuous operation: One device covers both specific spot checks and ongoing process monitoring.
  • Sampling during the ongoing process: Silos or lines do not need to be opened; no one has to reach into the product with a shovel or sample trier.
  • Directly into the sample container: The sample is collected without transfer and can go immediately to the laboratory.
  • Freely selectable drive: From manual operation to fully automated sampling with feedback to the control system.

What matters during design

Whether a sample is representative is decided during the planning stage. We clarify these points with you before construction:

  • Bulk material: Grain size, flowability, moisture, temperature, abrasiveness, and tendency to stick.
  • Installation situation: Silo, container, chute, downpipe, or conveying line, plus installation position, available space, and connection to the wall or pipe.
  • Process conditions: For conveying lines, for example, whether pneumatic conveying is done with overpressure or underpressure.
  • Sample quantity and frequency: Individual sample or continuous extraction, how much material and how often.
  • Drive and automation: manual, electric, or pneumatic, connection to your control system.
  • Environment and regulations: Explosion protection (ATEX), food or pharmaceutical requirements (FDA), cleaning.

The general statistical principles for sampling granular bulk materials are described in the ISO 11648-2 standard. If a specific standard or internal test regulation applies to your product, please let us know with your inquiry. We will take it into account during the design.

Rotary piston, piston, or screw sampler?

All three designs take samples from silos and lines. The choice depends primarily on the sample quantity and installation situation:

DesignPrincipleSizeInstallation
Rotary piston samplerRotating piston opens the sampling apertureDN 100Silo, container, chute, downpipe, and conveying line
Piston samplerPiston moves into the product and discharges the sample into the containerDN 50Silo, container, chute, downpipe, and conveying line
Screw samplerConveyor screw transports the product into the containerDN 35, 50, 80Silo, container, downpipe

For conveyor belts, there is the belt sampler, and for downpipes, there is additionally the swivel sampler.

Where rotary piston samplers are used

Typical installation points are silos and storage containers, downpipes after mixers or dryers, conveying lines between two process steps, and chutes before filling. RATEC samplers are in use in these industries, among others:

  • Heavy and Fine Chemicals
  • Mineral Industry
  • Food Industry
  • Petrochemical Industry
  • Pharmaceutical Industry
  • Rubber and Carbon Black Industry
  • Feed and Seed
  • Wood and Paper Industry
  • Waste and Recycling
Rotary piston sampler on container

Customized by RATEC: Engineering and manufacturing from a single source

RATEC is at home in the bulk material sector. We plan, design, and manufacture components for bulk material systems in our own production facility in St. Veit an der Glan in Carinthia, certified according to ISO 9001, EN 1090-1, and ISO 3834-2. Every rotary piston sampler is tailored to your application:

  • Design based on your bulk material, your installation situation, and your sample quantity
  • Manual, electric, or pneumatic drive, matching your control system
  • ATEX-compliant version for explosive areas
  • FDA-compliant product-contact materials for food and pharma
  • Sample container of your choice: bottle, bag, or bin
  • Expansion with a sample collector for up to 48 sample containers
  • Sample transport to the laboratory via pneumatic tube or pneumatic conveying
  • Special samplers if a standard solution does not fit

You get everything from one contact partner: consulting, design, manufacturing, and, on request, connection to your existing system. You can find an overview of all designs on our Samplers page.

Are you planning sampling from a silo or line?

Briefly describe your bulk material and your installation situation. We will get back to you with a concrete solution proposal for your rotary piston sampler.

Frequently asked questions

Key details include the bulk material, the installation situation with silo, container, chute, or pipeline, and for conveying lines the pressure, sample quantity and frequency, drive type, as well as ATEX, FDA, or a sampling standard. RATEC provides a questionnaire for sampling systems for your inquiry. There is no flat-rate price, as every device is engineered to match the bulk material and installation situation — you will receive an individual quote.

Send your inquiry now

In continuous sampling, the opening remains open for a defined period, with a partial flow continuously extracted. This generates a composite sample, representing, for instance, an entire shift or production order. RATEC rotary piston samplers offer operation with either individual samples or continuous sampling, eliminating the need to open silos or pipelines.

Rotary piston samplers are suitable for larger sample volumes or coarser bulk materials, offering a wider opening than smaller designs. For smaller quantities, a piston sampler is often sufficient. RATEC recommends the optimal design based on your bulk material and required sample volume.

A rotary piston sampler is a bulk material sampler where a rotary-driven piston opens and closes a sampling port in the wall of a silo, container, or pipe. The product flows through the opening directly into the sample container. RATEC rotary piston samplers feature a standard DN 100 size; other sizes are available upon request.

Yes, a specific version is available for direct installation in container walls. Typical installation points also include downpipes after mixers or dryers, conveying lines, and chutes before filling. RATEC supplies a version with a pneumatic rotary actuator for containers and adapts the connection and installation position to your specific plant.