discover

Screw Sampler: Controlled Sampling from Silo and Chute

Schneckenprobenehmer pneumatisch

The RATEC screw sampler takes controlled samples from silos, containers, and chutes: The bulk material falls from above into an open conveying screw and is directly transported into the sample container. Available in sizes DN 35, DN 50, and DN 80, with a plastic or stainless steel screw, and with manual, electric, or pneumatic drive. On request, we supply it in ATEX and FDA-compliant versions. RATEC develops and manufactures every screw sampler in-house in St. Veit an der Glan.

How the Screw Sampler Works

  1. Collect: The bulk material falls from above into the open conveying screw, which extends into the silo, container, or chute.
  2. Convey: The rotating screw transports the material controllably outwards.
  3. Fill: The sample goes directly into the connected sample container.

Because the screw actively conveys the material, the screw sampler is well-suited for process-accompanying sampling: It takes the sample while the product is in motion in the silo or chute, without needing to open or stop anything.

Screw Sampler frontview and view of the back

Technical specifications

FeatureRATEC Screw Sampler
SizesDN 35, DN 50, DN 80
Installation locationsSilo, container, downpipe
Drivemanual (handwheel), electric, or pneumatic
ScrewPlastic or stainless steel
Bulk materialsPowders, granules, dusts, grains
CustomizableHousing shape, sample container
VersionsATEX and FDA-compliant materials upon request

One Basic Principle, Many Variants

The screw sampler is a modular system. The basic principle remains the same, but the design is tailored to your bulk material and installation situation:

  • Size: DN 35, DN 50, or DN 80, depending on the required sample quantity and material properties.
  • Screw: made of plastic or stainless steel, suitable for your product.
  • Drive: The same model variant is available with a manual handwheel, electric geared motor, or pneumatic drive.
  • Housing and Sample Container: various housing shapes and containers, adapted to the installation location and laboratory.

Thus, the range extends from simple handheld devices for occasional spot checks to fully automatic sampling triggered by your control system.

Screw sampler electric, pneumatic and manual

Advantages of the Screw Sampler

  • Controlled Extraction: The screw conveys the material evenly into the sample container.
  • Three Sizes: from small laboratory samples to larger quantities.
  • Material According to Product: Screw made of plastic or stainless steel.
  • Freely Selectable Drive: Handwheel, electric motor, or pneumatic with the same design.
  • Directly into the Container: The sample is collected without transfer.

Where Screw Samplers Are Used

The screw sampler is installed on silos and storage containers, as well as on chutes, for example, under a mixer, after a dryer, or before filling. It is suitable for powders, granules, dusts, and grains. For chutes and conveying lines, the piston sampler and the rotary piston sampler are the appropriate types; for conveyor belts, the belt sampler.

Robust, Hygienic, and Easy to Operate

Like all RATEC samplers, the screw sampler is designed for continuous use in bulk material technology: robust, corrosion-resistant, and durable. The devices are hygienic and easy to clean, which is particularly important in the food and pharmaceutical industries. No training is required for operation.

Srew sampler manual

Custom-made by RATEC

RATEC is at home in the bulk material sector and manufactures components for bulk material systems in its own plant in Carinthia, certified according to ISO 9001, EN 1090-1, and ISO 3834-2. Every screw sampler is designed for your bulk material and installation situation, optionally with a sample collector for up to 48 sample containers and sample transport to the laboratory. If a sampling standard such as ISO 11648-2 or an internal test specification applies to your product, we take it into account in the design.

RATEC samplers are used, among other areas, in the chemical industry, the minerals industry, the food and pharmaceutical industry, petrochemicals, the rubber and carbon black industry, animal feed and seed, the wood and paper industry, and recycling. You can find an overview of all designs under Samplers.

Are you planning sampling from a silo or chute?

Briefly describe your bulk material and your installation situation. We will get back to you with a specific solution proposal.

Frequently asked questions

Key factors include bulk material data (grain size, flowability, moisture, temperature, abrasiveness, and adhesion tendency), installation situation, sample volume and frequency, drive and sample container, as well as ATEX, FDA, or sampling standard requirements. RATEC provides a specific questionnaire for sampling systems to facilitate inquiries. No flat-rate price is available as each unit is engineered to specific material and installation requirements; you will receive a customized quote.

Send inquiry now

Stainless steel is robust, temperature-resistant, and easy to clean; plastic is lightweight, gentle on products, and offers advantages for abrasive or sticky materials. Selection depends on bulk material, temperature, and hygiene requirements. RATEC supplies both materials, including FDA-compliant product-contact surfaces for food and pharmaceutical applications.

The size depends on the required sample volume as well as the bulk material’s particle size and flow behavior. DN 35 is the most compact standard size for small samples; DN 80 is the largest for higher volumes or coarser products. RATEC recommends the right size during design and can also manufacture other sizes on request.

Screw samplers work well for powders and granules, even those with poor flow properties, since the screw actively conveys the product instead of relying on gravity alone. Sample quantity can be precisely set via speed and run time. RATEC adapts screw geometry and material to your bulk material.

A screw sampler is a bulk material sampling device. An auger extracts material from a silo, container, or downpipe, actively conveying it into a sample vessel. Product enters the open auger from above, which then transports it outwards. RATEC manufactures screw samplers as standard in DN 35, DN 50, and DN 80. Other sizes are available upon request.