When no standard sampler fits your bulk material or installation situation, RATEC develops a custom sampler tailored precisely to your task. On request, sample transport via pneumatic tube system or pneumatic conveying is included, so every sample reaches the lab safely and without detours. We determine the extraction principle, materials, housing, and drive, design the device, and manufacture it at our own plant in St. Veit an der Glan. Whatever is technically possible in bulk material sampling, we make it happen.
Table of Contents
When a custom sampler is the right choice
With screw, piston, rotary piston, swing, and belt samplers, we cover most installation situations. However, some tasks call for a dedicated solution. Typical reasons include:
- Unusual material: bulk materials that are difficult to sample with a standard design, such as fibers, coarse pieces, or strongly adhesive products.
- Limited installation space: the sampling point is tight, hard to access, or cannot be modified.
- Special requirements: strict hygiene standards in food and pharmaceutical applications, or explosion protection.
- Specific extraction principle: your process or testing specification requires a particular type of extraction.
- Unusual installation point: such as an open chute instead of a closed pipeline.
In these cases, we don’t build a compromise — we build the device that fits your material.
What we solve for you
- Extraction principle: matched to material and process, so the sample is representative of the entire batch.
- Materials and housing: tailored to the product and environment, with FDA-compliant, product-contact materials available on request.
- Drive and control: from manual operation to fully automatic sampling, electric or pneumatic.
- Installation and integration: into existing or new systems, on request including sample transport to the lab.
Sample transport: straight from the extraction point to the lab
A good sample is of little use if it takes a long time to arrive or is altered along the way. Sample transport systems carry samples safely and efficiently from the extraction point to the lab or analysis area. RATEC offers two options:
- Pneumatic tube system: The sample is sent to the lab in a carrier through a tube line. It remains sealed and separate from other samples.
- Pneumatic conveying: The sample material is conveyed with air through a line directly to the lab.
This eliminates the distance between the plant and the lab, and samples reach analysis promptly. Combined with a sampler and a sample collector, the entire sampling process runs from the process to the lab without manual handling.
How your custom sampler is created
- Clarifying requirements: You describe the bulk material, installation situation, and sample quantity. A RATEC questionnaire for sampling systems is available for this purpose.
- Designing and engineering: We determine the extraction principle, materials, drive, and integration, and coordinate the solution with you.
- Manufacturing: The sampler is built at our own plant.
- Integration: On request, we handle the integration into your system, up to and including sample transport to the lab.
Customized by RATEC
RATEC is at home in the bulk material sector and manufactures components for bulk material systems at our own plant in Carinthia, certified to ISO 9001, EN 1090-1, and ISO 3834-2. Engineering and manufacturing come from a single source, giving you one point of contact from the first idea through to commissioning. ATEX-compliant designs for potentially explosive atmospheres and FDA-compliant materials are available on request. If a sampling standard such as ISO 11648-2 or an internal testing specification applies to your product, we take it into account during design.
RATEC sampling systems are used, among others, in chemistry, the mineral industry, the food and pharmaceutical industries, petrochemicals, the rubber and carbon black industries, for feed and seeds, in the wood and paper industries, and in recycling. An overview of all designs can be found under Samplers.

Doesn’t your sampling fit any standard device?
Tell us briefly about your bulk material, your sampling point, and what the sample needs to achieve. We’ll get back to you with a concrete solution proposal.






